7
7.9
Placing a Stamp on the Transmitted Document
It is possible to place a transmission stamp on documents.
Placing a Stamp on the Transmitted Document
0 An optional TX Marker STAMP UNIT 2 is necessary.
0 When the "Stamp" function is selected, the document should be loaded
into the ADF. Transmission is not possible by positioning the document
on the original glass.
0 Transmission stamp cannot be set at the same time as double-sided
transmission.
0 There is no stamping when in copy mode.
1
Press [Fax/Scan] on the control panel to open the fax screen.
2
Press [FAX Menu].
3
Press [Set 2], and then [Stamp].
4
Select the stamping position, and
then press [Enter].
5
Designate the destination. Set the original document.
6
Press [Start].
The document is saved in the memory and sent at the specified time.
7-20
Transmission applications
bizhub 362/282/222