11
To specify the procedure performed with documents received on each
line
1
After entering Administrator mode, press [Admin. 1].
2
Press [Document Management].
3
Press [RX Document].
4
Press [Port].
–
If software switch settings were
specified to block faxes received
from senders other than those
specified, only settings for "F-
CODE" and "Port" can be
specified. For details on the
software switch settings, refer to
"Configuring Functions (Soft
Switches)" on page 11-67.
5
Press [G3].
–
If the optional fax multi line is
being used, two general
subscriber lines can be used.
Specify settings for each port:
"G3-1" (port 1) and "G3-2"
(port 2).
11-56
Utility mode
bizhub 362/282/222