Konica Minolta bizhub 362 User Manual page 226

11
10
Press [Dialing Method].
11
Press the button for the dialing
method that is used, and then press
[Enter].
– DP20: Select if using a phone line
with a dialing speed of 20 pps.
– DP10: Select if using a phone line
with a dialing speed of 10 pps.
– PB: Select if using a push button
line.
12
Check the information to be
registered, and then press [Enter].
To change a setting, press the button
for the setting to be changed, and
then specify the new setting.
13
Press [Enter] in each screen until the standby screen (initial screen)
appears.
Note
The registered machine telephone number can be changed by following
the same procedure used to register it.
11-26
Utility mode
bizhub 362/282/222