Document Management With F-Code - Konica Minolta bizhub 362 User Manual
Facsimile operations
Hide thumbs
Also See for bizhub 362:
- Service manual (846 pages) ,
- User manual (450 pages) ,
- Installation manual (36 pages)
Table of Contents
Advertisement
11
Document Management with F-CODE
This machine can be set to perform a specific operation when a document is
received with an F-code.
Note
Up to 10 F-codes can be specified.
Settings can be specified for the following.
Parameter
F-CODE
RX Doc. Settings
Forwarding Dest.
11-58
Description
Sets the receiving mode for each F-CODE. When a document
is received that has an F-CODE assigned to it, that document
is received according to the settings assigned to that code
beforehand.
Select how the document received with the specified F-code
is managed.
Print: Select to print documents immediately.
Forward: Select to forward to a destination. Up to 300 for-
warding recipients can be specified.
Print & Forward: Select to both print and to forward to a des-
tination. Up to 300 forwarding recipients can be specified.
Specify a destination when "RX Doc. Settings" is set to "For-
ward".
Utility mode
bizhub 362/282/222
Advertisement
Table of Contents
