Konica Minolta bizhub 362 User Manual page 196

10
15
Check the information to be
registered, and then press [Enter].
– To change a setting, press the
button for the setting to be
changed, and then specify the
new setting.
16
Press [Enter] in each screen until the
standby screen (initial screen)
appears.
Note
If software switch settings were specified to limit use of the FAX
Registration screen to the administrator, [FAX] does not appear in the
User Setting screen. In this case, destination can only be registered,
edited and deleted in Administrator mode. For details on the software
switch settings, refer to "Configuring Functions (Soft Switches)" on
page 11-67.
10-32
Registering/Settings
bizhub 362/282/222