10
Note
If software switch settings were specified to limit use of the FAX
Registration screen to the administrator, [FAX] does not appear in the
User Setting screen. In this case, destination can only be registered,
edited and deleted in Administrator mode. For details on the software
switch settings, refer to "Configuring Functions (Soft Switches)" on
page 11-67.
Reminder
If the [Utility/Counter] key was pressed to register items and specify
settings, be sure to press the [Reset] key in the control panel after
returning to the standby screen (initial screen).
10-4
Registering/Settings
bizhub 362/282/222