Konica Minolta bizhub 362 User Manual page 81

Transmission
5
Press [Enter].
The Dest. tab of the Check Job
Details screen appears so that the
selected destinations can be
checked.
If a program was selected, this
screen does not appear.
6
Check the selected destinations, and
then press the [Start] key.
– Using the software switch
settings, you can specify whether
or not a screen asking for
confirmation of the settings is
displayed before a broadcast
transmission. For details, refer to
"Configuring Functions (Soft
Switches)" on page 11-67.
Transmission begins.
Note
It is possible to check the results of broadcast transmission. Refer to
"Settings for Report Output" on page 11-50.
If software switch settings were specified to limit dialing, a fax cannot be
sent by directly typing in the fax number. For details on the software
switch settings, refer to "Configuring Functions (Soft Switches)" on
page 11-67.
If software switch settings were specified to prevent broadcast
transmissions, a fax cannot be sent to multiple recipients. For details on
the software switch settings, refer to "Configuring Functions (Soft
Switches)" on page 11-67.
bizhub 362/282/222
3
3-29