Transmitting While Scanning The Original (Real-Time Transmission) - Konica Minolta bizhub 362 User Manual
Facsimile operations
Hide thumbs
Also See for bizhub 362:
- Service manual (846 pages) ,
- User manual (450 pages) ,
- Installation manual (36 pages)
Table of Contents
Advertisement
7
7.10
Transmitting while Scanning the Original (Real-time
Transmission)
When real-time transmission is designated, it is possible to read documents
one page at a time to match the transmission state.
Transmitting while Scanning the Original (Real-time Transmission)
0 When the "Quick Scan TX" function is selected, the document should be
loaded into the ADF. Transmission is not possible by positioning the
document on the original glass.
0 Real-time transmission cannot be used during transmission or reception.
0 Multiple destinations cannot be designated in real-time transmission.
0 Real-time transmission cannot be set at the same time as 2in1
transmission, double-sided transmission and time designed
transmission.
1
Press [Fax/Scan] on the control panel to open the fax screen.
2
Press [FAX Menu].
3
Press [FAX], and then [Quick Scan
TX].
–
To cancel the function, press the
button again to deselect it.
[Quick Scan TX] is highlighted.
4
Designate the destination. Set the original document.
5
Press [Start].
7-22
Transmission applications
bizhub 362/282/222
Advertisement
Table of Contents
