11
11.17 Settings for Report Output
Specify the conditions for printing transmission result reports and activity
reports.
Settings can be specified for the following.
Parameter
TX Report
Activity Report
!
Detail
If "Activity Report" is set to "ON", the activity report contents can be
outputted as a CSV file and sent by e-mail to the administrator when the
activity report is printed. To manage the contents of the activity report as
data, specify the e-mail address of the administrator.
For details on specifying the e-mail address of the administrator, refer to
"Administrator management 1 screen" on page 11-21.
11-50
Description
Specifies how to output the report for verifying FAX transmis-
sion activity.
ON: Select this to automatically print a TX report for each TX.
If TX Fails: Select this to automatically print a TX report only
when there is a failure.
OFF: Select this so TX reports are not automatically printed
out.
Specify whether or not to automatically output the activity re-
port with every 50 transmissions.
Utility mode
bizhub 362/282/222