Specifying Whether Or Not A Telephone Is Connected And Whether Or Not A Received Date Report Is Added And Its Format (Mode 016) - Konica Minolta bizhub 362 User Manual

11
Specifying whether or not a telephone is connected and whether or not
a received date report is added and its format (mode 016)
Specify whether or not a telephone is connected, and whether or not a
received date report is added and how it is formatted.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were
selected. The numbers on the right side indicate the page numbers with
descriptions for the corresponding function.
Bit
7
6
5, 4, 3, 2
1
0
11-80
7 6 5 4 3 2 1 0
0 1 0 0 0 0 0 0 (HEX: 40)
Description Setting
----------------------- 0
Specifies whether or 0
not an external tele-
1
phone is connected.
----------------------- 0000
Specifies whether or 0
not a received date
1
report is attached.
Specifies whether 0
the received date re-
port is attached out-
1
side or inside of the
image.
Description
*Do not change these bits
when specifying settings
for this function.
Not used
Used
*Do not change these bits
when specifying settings
for this function.
Not attached
Attached
Attached within the im-
age
Attached outside the im-
age
bizhub 362/282/222
Utility mode
Page Refer-
ence
----------
p. 3-35
----------
----------
----------