Specifying settings using PageScope Web Connection
12.7
Line settings (Administrator mode)
The information for the line connected to this machine can be specified.
Settings can be specified for the following.
Item
Self-ID
To specify the machine telephone number
Register the information required for a fax transmission, such as the
machine's telephone number, whether or not a private branch exchange is
used, and the dialing system.
1
In the Administrator mode, click the [Fax/Scan] tab.
–
For the procedure to log on to Administrator mode, refer to
"Logging on to administrator mode" on page 12-10.
2
Click [Initial Setting].
3
Specify the various settings, and then click [Apply].
bizhub 362/282/222
Description
Enter the text that appears in the recipient's reports and machine control pan-
el. This allows the receiver to easily check that the fax was sent from this ma-
chine.
12
12-31