Table of Contents
Advertisement
Maintenance and Inspections
WARNING
●
When cleaning the machine, turn off the machine and computer, and unplug the interface cables and
power plug. Failure to do so can result in a fire or electrical shock.
●
Unplug the power plug from the AC power outlet periodically and clean the area around the base of
the power plug's metal pins and the AC power outlet with a dry cloth to remove all dust and grime. In
damp, dusty, or smoky locations, dust can build up around the power plug and become damp, which
can cause a short circuit, resulting in a fire.
●
Use a damp, well wrung-out cloth to clean the machine. Dampen cleaning cloths with water only. Do
not use alcohol, benzine, paint thinner, or other flammable substances. Do not use tissue paper or
paper towels. If these substances come into contact with electrical parts inside the machine, they may
generate static electricity or result in a fire or electrical shock.
●
Some areas inside the machine are subject to high voltage. When removing jammed paper or when
inspecting inside of the machine, be careful not to allow necklaces, bracelets, or other metal objects to
touch the inside of the machine, as this can result in burns or electrical shock.
●
Do not dispose of used toner cartridges in open flames. This may cause the toner remaining inside the
cartridges to ignite, resulting in burns or fire.
●
If you accidentally spill or scatter toner, carefully gather the toner particles together or wipe them up
with a soft, damp cloth in a way that prevents inhalation.
Never use a vacuum cleaner that does not have safeguards against dust explosions to clean up spilled
toner. Doing so may cause a malfunction in the vacuum cleaner, or result in a dust explosion due to
static discharge.
●
Confirm that the power plug or power connector is inserted completely after cleaning the machine.
Failure to do so can result in an overheating and fire.
●
Check the power cord and plug regularly. The following conditions may result in fire, so please contact
your local authorized Canon dealer or the Canon help line.
- There are burn marks on the power plug.
- The blade on the power plug is deformed or broken.
- The power is turned OFF or ON when bending the power cord.
- The coating of the power cord is damaged, cracked, or dented.
- A part of the power cord becomes hot.
●
Check regularly that the power cord and plug are not handled in the following manner. Failure to do
so can result in a fire or electrical shock.
- The power connector is loosened.
- Stress is being applied to the power cord by a heavy object or by fixing it with staples.
- The power plug is loosened.
- The power cord is tied in a bundle.
- A part of the power cord is put in an aisle.
- The power cord is put in front of the heating appliance.
Important Safety Instructions
10
85RS-005
Advertisement
Table of Contents
Troubleshooting
