Final Reduction Gear Oil; Drive Belt - KYMCO PEOPLE S 125 Service Manual

3
. INSPECTION/ADJUSTMENT

FINAL REDUCTION GEAR OIL

OIL LEVEL CHECK
＊
Place the motorcycle on its main stand
on level ground for oil level check.
Stop the engine and remove the oil check bolt.
The oil level shall be at the oil check bolt hole.
If the oil level is low, add the recommended
oil to the proper level.
Recommended Oil:
GEAR OIL VISCOSITY SAE90#
Install the oil check bolt.
＊
Make sure that the sealing washer is in
good condition.
OIL CHANGE
Remove the oil check bolt.
Remove the oil drain bolt and drain the oil
thoroughly.
Install the oil drain bolt.
Torque: 1.0kg-m
＊
Make sure that the sealing washer is in
good condition.
Fill with the recommended oil.
Oil Capacity: At disassembly : 210cc
At change
Oil Capacity: At disassembly : 50cc 120cc
At change
Reinstall the oil check bolt and check for oil
leaks.
Torque: 1.2kg-m

DRIVE BELT

Remove the left crankcase cover. ( 9-3)
Inspect the drive belt for cracks or excessive
wear.
Replace the drive belt with a new one if ne-
cessary and in accordance with the Mainte-
nance Schedule.
3-7
: 180cc
: 50cc 90cc
PEOPLE S 4T
Oil Check Bolt
Oil Check Bolt Hole
Sealing Washer
Oil Drain Bolt
Drive Belt