Center the displays on the Media Center.
16
display bracket to lock the displays.
Power Rating:
Voltage rating: 100-240 VAC, 50/60Hz
Maximum power consumption (configured with Group
Series 500 codec and EagleEye IV camera under full
load operating conditions): 231.4W
Approximate system weight (including display(s),
codec, camera, and sound system):
Setting up the Polycom® RealPresence® Group Series Media Center
Insert one M6 x 16 flanged button head screw into each
Regulatory Notices:
Only use this equipment with the displays supplied by
Do not use a power cord that is damaged. This could cause
Only use a power cord which is appropriately rated and
715
lbs.
This equipment should be used only on even surfaces.
When moving or positioning the system, only use the
This equipment has lockable wheels which should be
When connecting to the mains supply, connect only to an
Keep ventilation openings free from any obstructions.
The ambient operating temperature rating of this equipment
Do not immerse the system in any liquid or place any liquids
Do not spray liquids directly onto the system when cleaning.
For further information concerning the individual components
For support or service, please contact your Polycom®
This equipment is intended for indoor use only.
Polycom.
fire or electric shock. Contact the manufacturer for a
replacement cord, if necessary.
approved relevant to the country of use.
handles located at the bottom of the display rail at the rear
of the unit.
applied while the cart is stationary.
earthed supply outlet which is installed near the equipment
and is easily accessible.
is 0 - 40ºC and should not be exceeded.
on it.
Always apply the liquid first to a static-free cloth.
of this equipment, please refer to the respective product
literature.
distributor or go to Polycom Support at
www.polycom.com/support.
5
Need help?
Do you have a question about the RealPresence Group Series and is the answer not in the manual?
Questions and answers