Table of Contents
Advertisement
29
Chapter 4
Troubleshooting
The Skyline Access Point is designed to be very easy to install and operate. However, if
you experience any difficulties, use the information in this chapter to help diagnose
and solve the problem. If you still cannot resolve the problem, contact Proxim
Technical Support. See "Technical Support" on page 34.
If you require assistance to install your local network, Proxim can put you in contact
with a Skyline reseller in your area. The reseller is an expert in the design, installation,
and maintenance of local area networks and will be able to examine your needs and
recommend the most cost-effective solution for you, whether you are installing a new
network or adding on to an existing one. For the location of the Skyline reseller
nearest you, contact Proxim at 1-800-229-1630 and ask for the Sales Department.
LED Error Codes
The Status LED on the top of the Skyline 802.11a Access Point will flash red in a
repeating pattern to indicate the following errors:
1 blink ..............................................Memory error
2 blinks ............................................Flash write error
3 blinks ............................................Ethernet initialization error
4 blinks ............................................Radio initialization error
If you see any of the above flashing sequences, recycle power to the Access Point. If
the flashing sequence persists after you have reset the unit, make a note of which of
the above patterns you have and contact Proxim Technical Support.
Advertisement
Table of Contents
