Running [No Stamp] Mail - Hasler IM-460 User Manual

Running [No Stamp] Mail

3.5
This section describes the parameter settings and mail handling sequence for mail
processes that use the [No Stamp] type of stamp, to:
Seal envelopes, using the auto-feeder (if installed)
•
3
• Only convey mail, for counting or testing purposes.
See also
To choose the type of stamp to use for each type of mail process, see Choosing a
•
Type of Stamp p.25).
Sequence of Settings
The procedure below outlines steps in a recommended sequence to process mail.
You must begin with selecting the Type of stamp to gain access to the corresponding
parameters and be able to run mail.
How to Process Mail without Printing (Settings)
How to Process
Mail without
Printing
(Settings)
52

Running [No Stamp] Mail

Make sure you have completed the preparation steps mentioned
in Preparing and Starting your Work Session p.27.
Main setting:
1
Make sure you are on the home screen of the [No stamp]
type of stamp.
The type of stamp is indicated at the top of the home screen
as illustrated.