Table of Contents
Advertisement
Safety Requirements
1.2
Safety Requirements
Power Connection
Before connection, check whether the mailing system is suitable for the local AC
power voltage; refer to the type plates at the back of the pieces of equipment.
•
Use a socket outlet located close to the equipment and easily accessible. As the
power supply cord is the equipment disconnecting device, do not route the power
cord between pieces of furniture or over sharp edges.
Avoid using outlets controlled by wall switches or shared by other equipment.
•
•
Make sure there is no strain on the power supply cord.
THIS EQUIPMENT MUST BE GROUNDED
•
Only connect the power plug to a socket outlet provided with a
protective ground contact.
•
To reduce the risk of fire, use only the power cord supplied with
the mailing system.
•
Do not use ground adaptors.
•
Do not use this product on a wet floor or near water.
•
In case of liquid spillage, disconnect the power cord from the
wall plug and proceed to cleaning.
1
5
Advertisement
Chapters
Table of Contents
