Weighing Problems - Hasler IM-460 User Manual

Weighing Problems

11.3 Weighing Problems

The Weighing Device does not Weigh Properly
The Base does not seem to display a correct weigh.
You have to check the weighing device (Weighing Platform or IS Dynamic Scale) as
follows.
Possible causes
The weighing device is not
selected.
There are vibrations or air
drafts in the weighing area.
Something is touching or
laying on the weighing device.
The weighing device zero is
not correct.
11
206
Actions
See the weighing type selection procedures in
Choosing a Weighing Type p.59.
Use a solid and steady table:
Far from any door
•
• Far from any fan.
Clear the weighing zone and rezero the weighing
device (see Weighing Settings p.153).
See the weighing device zeroing procedures in
Weighing Settings p.153