Running [Received] Mail; How To Process Received Mail (Settings) - Hasler IM-460 User Manual

Running [Received] Mail

3.4

Running [Received] Mail

In this Section
This section describes the parameter settings and mail handling sequences for mail
processes that use the [Received] type of stamp, to:
Print the date on received mail, and/or
•
Print 'Received' on received mail.
•
See also
To choose the type of stamp to use for each type of mail process, see Choosing a
•
Type of Stamp p.25).
Sequence of Settings
The procedure below outlines steps in a recommended sequence to process mail.
You must begin with selecting the Type of stamp to gain access to the corresponding
parameters and be able to run mail.

How to Process Received Mail (Settings)

How to Process
Received Mail
(Settings)
Make sure you have completed the preparation steps mentioned
in Preparing and Starting your Work Session p.27.
Compulsory settings:
1
Make sure you are on the home screen of the [Received]
type of stamp.
The type of stamp is indicated at the top of the home screen
as illustrated.
2
Check or change the type of stamp.
Press to access the Build stamp/imprint screen:
3
49