How To Clean The Mail Path Sensors - Hasler IM-460 User Manual

Cleaning Accessory Belts and Rollers
Follow the steps below to clean the belts and rollers of the feeder and of the Dynamic
Scale (if installed).
How to Clean the Accessory Belts and Rollers
How to Clean
the Accessory
Belts and Rollers
Cleaning Mail Path Sensors

How to Clean the Mail Path Sensors

How to Clean
the Mail Path
Sensors
To clean the accessory belts and rollers:
1
Open equipment covers;
in the Mixed
Feeder, press the left of
the upper blue handle to
release and lift up the
drive assembly.
2
Clean the belts and/or
rollers with a damp cloth
or 70° alcohol on a
cotton applicator.
3
Close the assemblies and covers.
To clean the mail path sensors:
1
Use a damp cloth or 70° alcohol on a cotton applicator.
2
Allow the system parts to dry and close all covers and as-
semblies.
Size
10
195