Page 1
Choose your set-up location with this in mind. If you are unsure what type of phone line you have, most fax machines use an anlog line. STEP 1 Open the WJ 65, WJ 95 or WJ 110 carton and remove the contents. Handfeet Platform Catch Tray Power Cord &...
Page 2
STEP 2 Open the optional WJ 65/95/110AF Feeder, WJ Moistener or WP weigh platform cartons and remove the contents. Feeder Moistener WJWP10, IWP30, or WJWP70 Platform 4128811U/B 12/08/2006 ORIG0122-2...
Page 3
- If you ordered an WJ Moistener to use with the Hand Feed Platform, go to step 3 - If you ordered an WJ 65/95/110AF Autofeed and Moistener, go to step 4 - If you did not order an Autofeed or Moistener, go to step 5...
Page 4
2) Pull down slightly then separate infill from handfeed platform. - Attach the WJ Moistener Unit to the Handfeed Platform. 4128811U/B 12/08/2006 ORIG0122-4...
Page 5
- Ensure that the Tabs and Slots interlock as illustrated. - Press sealer and platform together then push sealer up to lock. 4128811U/B 12/08/2006 ORIG0122-5...
Page 6
STEP 4 Attach Optional Moistener Unit to the Autofeed Unit If you received an optional WJ 65/95/110 AF Autofeed, you must first attach the WJ Moistener. Place the Moistener Unit on the table, then lower the Autofeed Unit onto the Sealer ensuring that the slots on the Autofeed fit tightly over the tabs on the Moistener Unit as illustrated.
Page 7
Platform With the Autofeed or Handfeed Platform in the desired position on the table, lower the WJ 65/95/110 into place so that the slots fit over the tabs as illustrated. The position of the slots in the WJ 65/95/110 are easily identifia- ble by the metal tabs easily seen from the top when lowering the unit.
Page 8
1) Position the weigh platform on its support. Excess cable can be loosely in the clips under the support. 2) Position the support platform on top of the WJ 65/95/110 unit so that the pins on the underside of the support fit into the locating points on the rear cover of the WJ 65/95/110.
STEP 7 Fill the Label Dispenser A package of postage labels is included with your WJ 65/95/110 mail machine. The label dispenser will hold up to 50 labels. 1) Open the top cover to access the label release lever. 2) Insert labels into the dispenser with the tab uppermost and the label side to be printed facing the direction of travel.
Page 10
STEP 8 Fill the optionnal Moistener Reservoir For safety always, disconnect mailing machine from the power outlet and keep top cover closed when filling the moistener. - Pull open the moistener bottle compartment door. - Grasp the plastic water bottle and lift to remove. - Unscrew the cap and fill the bottle to 1/2 inch from top with water.
Page 11
Do not plug the power cord into the machine until all the other connections have been made STEP 9 Connect optionnal IWP5 Five Pound Weigh Platform to WJ 65/95/110 Base mailing ma- chine Cable The weigh platform must be plugged into the lower...
Page 12
Do not plug the power cord into the machine until all the other connections have been made STEP 10 Connect optional WJWP10, IWP30 or WJWP70 Weigh Platform to WJ 65/95/110 Base Mailing Machine The weigh platform must be plugged into the lower connector...
Page 13
Do not plug the power cord into the machine until all the other connections have been made STEP 11 Connect optional Autofeed to WJ 65/95/110 Base Mailing Machine Cable 4128811U/B 12/08/2006 ORIG0122-13...
Page 14
Do not plug the power cord into the machine until all the other connections have been made STEP 12 Connect optional Hasler Mail Accounting PC to WJ 65/95/110 Base Mailing Machine This is only applicable for connection to a Hasler supplied PC Mail Accounting system 4128811U/B 12/08/2006 ORIG0122-14...
Page 15
Do not plug the power cord into the machine until all the other connections have been made If you have a Hasler PC Mail Accounting system : 1) Power on PC 2) Open the Mail Manager 2 PC software 3) Power on the machine...
Page 16
STEP 14 Power Cord Connection to WJ 65/95/110 Base Mailing Machine Power cord After you plug the power cord into the WJ 65/95/110, it will beep and display «PLEASE WAIT» while it goes through a power-up sequence. When it displays: SUPERVIS...
Page 17
STEP 15 Install Ink Cartridge in WJ 65/95/110 Mailing Machine Remove the Ink Cartridge from its packaging and carefully remove the tape seals. The WJ 65/95/110 mailing machine must be plugged in and displaying to install the Ink Cartridge. SUPERVIS USER...
Page 18
7) Lock the cartridge in position by carefully pushing down on the depressed semi-circle on the top of the cartridge with your index finger, then use your thumb to push the cartridge to the rear until you hear it ‘click’ into place. 8) Close the machine cover and press the blue button under 9) After a short delay the prompt to make a Test Print will be displayed:...
Page 19
STEP 16 Adding postage to the meter Postage is purchased from the Post Office using the Hasler Tele Meter Setting® (TMS) system. You must have funds in your TMS account to add postage to your meter. Ensure that the telephone cable from the modem socket...
Page 20
- If the amount is incorrect, press ESCAPE and start again from the Enter Amount screen. 6) The postage meter will connect to the Hasler Tele Meter Setting® system and system and upon completion of the Add Postage transaction, the following screen will be displayed.
Page 21
If your analog telephone system requires dialing a prefix, please refer to page 92 of the Mailing Machine User Guide for set-up instructions. 1) The WJ 65/95/110 mailing machine must be plugged in and displaying. SUPERVIS USER You can press to go directly to this screen.
Page 22
ON-LINE SERVICES ONLINE SERVER CALL ESCAPE 5) Choose ONLINE SERVER CALL and press DIALING PLEASE WAIT . . . TRANSACTION IN PROGRESS PLEASE WAIT . . . At the end of the connection you will get following display. START DECLARATION COMPLETE 6) Press 7) Choose ONLINE SERVER CALL again and press make your second call to the ONLINE SERVER to finish the...
Page 23
Depending upon the services you ordered, you may see screens indicating rates being downloaded to your ma- chine during the connection. At the end of the connection you will get following display. FINISH DECLARATION COMPLETE 8) Press then to return to the main screen. SUPERVIS USER 9) Press the blue button under USER to go to Ready mode.
Page 24
YOU ARE READY NOW TO USE YOUR MAILING MACHINE - For more details on using the WJ 65/95/110 mailing machine, please refer to your WJ 65/95/110 Mailing Machine User Guide. - For more details about the ONLINE SERVICES, please refer to WJ 65/95/110 Mailing Systems Online Services User Guide.
Page 25
Sy ailin g Sy g Sy st st st st st e e e e e m m m m m g Sy ur M ailin g Sy WJ 65/95/110 MAILING MACHINE UNPACKING AND SET-UP GUIDE 4128811U/B 12/08/2006 ORIG0121-V...
Need help?
Do you have a question about the WJ 65 and is the answer not in the manual?
Questions and answers