Hasler IM-460 User Manual page 48

3
42
In other modes (Manual weight entry
source)
From the [Standard] home screen, to print postage on mail
pieces:
1
Press . System motors start running.
2
Insert the mail piece into
the mail path against the
rear-guide wall, side to
be printed
upwards.
If mail piece is bigger than mail path maximum thickness (see Mail
Specifications p.20), press
printed at once.
The mailing system applies postage and the mail piece (or
label) is sent to the catch tray.
When sealer is activated, collect the mail piece stack in the catch
tray and put stack aside to let envelopes dry.
Otherwise, if you want to print several identical labels:
1
Press and enter the number of labels.
Make sure the labels are available in the label dispenser (see
Filling the Label Dispenser p.71).
2
Press to print the labels.
facing
to print a label. The label is
, No weight