Hasler IM-460 User Manual page 45

Otherwise, if you want to print several identical labels:
1
Press and enter the number of labels.
Make sure the labels are available in the label dispenser (see
Filling the Label Dispenser p.71).
2
Press to print the labels.
In Differential weighing mode (
From the [Standard] home screen, to print postage on mail
pieces:
1
Place the pile of mail you want to process on the weighing
platform, and then follow the instructions on the screen or the
steps below.
2
Withdraw the first mail piece from the top of the stack. The
mailing system displays weight and postage on the home
screen and starts motors automatically.
3
To print the stamp, insert
the mail piece into the
base against the rear-
guide wall, side to be
printed facing upwards.
If mail piece is bigger than mail path maximum thickness (see Mail
Specifications p.20), press
printed at once.
The mailing system applies postage and the mail piece (or
label) is sent to the catch tray.
When sealer is activated, collect the mail piece stack in the catch
tray and put stack aside to let envelopes dry.
4
Repeat previous step of each piece of mail.
To quit the process at any time, press
)
to print a label. The label is
.
3
39