Hasler IM-460 User Manual page 44

Running Mail
To run mail, follow the procedure below after you have completed the steps in Se-
quence of Settings p.35.
The way you will handle mail mainly depends on the weighing method you have
chosen. The weighing method is indicated by the icon in the Weighing type zone of
the screen. For more information, see Details on the Weighing Types p.60.
3
How to Apply Standard Postage (Running Mail)
How to Apply
Standard
Postage
(Running Mail)
38
If you need to change the current account before applying pos-
tage (on account-enabled configurations), see How to Change
Accounts p.56.
In Standard weighing mode (
From the [Standard] home screen, to print postage directly on
mail pieces:
1
Put the mail piece on the Weighing Platform.
The weight of the mail piece is displayed in the Weight area
of the screen and the postage amount is updated.
2
Press . The system motors start running.
3
Withdraw the envelope
from the WP and insert it
into the mail path against
the rear-guide wall, side
to be printed
upwards.
If mail piece is bigger than mail path maximum thickness (see Mail
Specifications p.20), press
printed at once.
The mailing system applies postage and the mail piece (or
label) is sent to the catch tray.
When sealer is activated, collect the mail piece stack in the catch
tray and put stack aside to let envelopes dry.
)
facing
to print a label. The label is