Table of Contents
Advertisement
Imprint Memories
8.10 Imprint Memories
The Imprint Memories allow to memorize imprint parameters for a standard stamp.
As user, you can use an Imprint Memory to restore all the parameters saved in this
Imprint Memory.
As supervisor, you can create, edit/modify or delete an Imprint Memory.
Each Imprint Memory is identified by a name and a number.
The system displays on the home screen the name of the current Imprint Memory .
Standard Stamp Imprint Memory
The table below gives the content of a [Standard] stamp imprint memory:
Imprint settings
8
Account setting
Managing Imprint Memories
How to Create an Imprint Memory
How to Create
an Imprint
Memory
166
To create an imprint memory:
1
As supervisor (see How to Log in as Supervisor p.144):
Press
> Predefined Imprint Management
2
Select a line named None in the list.
3
Press [OK] to create a new imprint memory.
4
Enter the name of the new imprint memory, then press [OK].
5
Enter the parameters, press [OK] to validate and display the
next list of parameters.
6
Repeat previous step until the system displays the name of
the new imprint memory in the list.
7
You can modify any parameter by using the > Edit/modify
function (see How to Edit / Modify an Imprint Memory p.167)
Text
Date mode
Rate
Account number if any
4
and type
or select the path:
Advertisement
Chapters
Table of Contents
