How To Re-Date Mail (Running Mail) - Hasler im-280 User Manual

Running Mail
To run mail, follow the procedure below after you have completed the steps in
quence of Settings

How to Re-Date Mail (Running Mail)

How to Re-Date
Mail (Running
Mail)
To change the date or date format from the
stamp
screen as follows:
Date
Select
screen. Select
more details, see
p.53 .
Press
3
Set postage to
zero.
Type 0 on the home screen to open the
screen and then just press [OK] . For more details, see
to Enter Postage Amount Manually
You are now ready to print.
p.38 .
The postage amount
print postage directly on mail pieces:
1
Insert the mail piece (or
a label tape) with the
side to be printed facing
upwards.
The side that you want to print on should be facing upwards.
If a mail piece is bigger than mail path maximum thickness (see
Mail Specifications
The mailing system applies postage.
and then select a date option in the
Today's date
for printing today's date. For
How to Change the Date on the Imprint
or to return to the home screen.
0 manually , to be sure that it will remain on
0 is displayed on the home screen. To
p.185 ), you may print on a label instead.
Customize
Manual amount
p.48 .
Date
3
How
Se-
39