Sealing Default State
8.11 Sealing Default State
As supervisor, you can set the sealing state by default (ON or OFF).
How Set the Default Sealing State
How Set the
Default Sealing
State
8
168
This setting is used only if Mixed-Size Feeder is connected.
To modify the default sealing state:
1
As supervisor (see How to Log in as Supervisor p.144):
Press
> Default User Settings > Base settings > Default sea-
ling
2
Modify the sealing state by default.
3
Press [OK] to validate.
3.2.6
and type
or select the path: