Running [Standard] Mail
3.3
In this Section
This section describes the parameter settings and mail handling sequences for the
mail processes that use the [Standard] type of stamp:
3
Applying postage using different rates
•
Re-dating mail
•
Correcting postage amount.
•
See also
About the use of other 'types of stamp', see Choosing a Type of Stamp p.25.
•
Applying Standard Postage
Sequence of Settings
The procedure below outlines steps in a recommended sequence to process mail.
As mail requirements differ from day to day, some of the settings may not be ne-
•
cessary, or their order may vary
You must begin with selecting the Type of stamp to gain access to the corres-
•
ponding parameters and be able to run mail.
How to Apply Standard Postage (Settings)
How to Apply
Standard
Postage
(Settings)
34
Running [Standard] Mail
Make sure you have already completed the preparation steps
mentioned in Preparing and Starting your Work Session p.27.
Compulsory settings:
1
Make sure you are on the home screen of the [Standard]
type of stamp. The type of stamp is indicated at the top of
the home screen as illustrated below.