Reeves G2 series Operation Manual page 65

Operation & Maintenance w/IPB
The items listed in the following table must be performed after each use for the
G2-I and G2S-I Decontamination Water Heater ONLY.
ITEM
INTERVAL
NO.
1 AFTER
2 AFTER
3
AFTER
4 AFTER
END OF WORK PACKAGE
Part Number: 1006375
This document contains information proprietary to DHS Systems LLC and is intended solely for use by its customers. No portion of this document may be reproduced
for release to a third party without written consent of DHS Systems LLC.
G2 Series Decontamination Water Heater
CAUTION
Table 2. Operator Functional Services.
ITEM TO BE
CHECKED
OR SERVICED
G2-I / G2S-I
ONLY
Clean Injector Rinse injector after each uses.
Clean Suction Remove filter screen from suction tube and
Tube Filter clean by washing in fresh water.
Screen
Clean Decon Rinse Decon solution tank thoroughly after
Solution Tank each use to prevent any contaminates from
entering tank
Clean Inlet Clean or replace inlet filter as required to
Filter increase life of water heater.
PROCEDURE
0013-5/6 blank
0013
EQUIPMENT NOT
READY/
AVAILABLE IF:
If Decon solution
remains in injector,
injector may dry out
and damage lower
end.
If filter screen is
damaged or
clogged.
If Decon solution
tank becomes
contaminated.
If inlet filter is dirty
and water heater
has decreased
pressure.
DHS Systems LLC