Reeves G2 series Operation Manual page 18

G2 series decontamination water heater
Hide thumbs Also See for G2 series:
Table of Contents

Advertisement

Operation & Maintenance w/IPB
WATER HEATERS CONTINUED
G2-I:
The Reeves G2-I multi-fuel 425,000 BTU, self-heating water and mobile Decon Solution Injection System is portable,
easy to maneuver and built for field use. The unit is the ideal way to supply multiple decontamination showers or
multiple field showers and sinks with heated water, thus increasing the safety and comfort of both patients and
personnel.
FEATURES
425,000 BTU, self-heating water system
Multi-Fuel (diesel, kerosene, home heating oil, and JP4)
Flow rate of up to 28 gallons per minute
10-gallon on-board fuel tank with drain plug
110V outlet onboard for convenience
Instructional panel for ease of operation
Built-in Anti-Scald Protection device factory pre-set at 110ºF
Thermostatically-controlled
Operator's panel with color-coded temperature and pressure gauges
Heater ignited by solid state electrical system (NO FLAME) that ignites upon water flow
Burner motor is a 1/4 hp, 120 V, 60hz, 1 ph and runs at 3450 rpm
Inline GFCI protection
Fuel filter with water separator
Modular design -- ruggedized for field use
Man portable and easy to maneuver
Mounted on four (4) no flat tires with hand brake for safety
1 ½" Female NST inlet with swivel and tethered compressed air adapter for winterization purposes
Unit will safely accept incoming water pressure of up to 125 psi
System can be adapted for use with multiple water sources that provide adequate water pressure and flow
(adapters not included)
Four (4) discharge outlets with male cam lock fittings and tethered caps (2 - decontamination solution / 2 -
fresh rinse
Includes two (2) 35-foot, ½" supply hoses with cam lock fittings that provide heated water and solution to
Reeves shower plumbing
Discharge outlets and supply hoses can be factory modified in order to supply heated water to non-Reeves
shower systems
FEATURES OF INJECTION SYSTEM:
Unit includes a non-electric, volumetric proportional injection system
Injection rate adjustable onboard -- even while water is flowing
Injection system designed to operate upon water flow
Chemically resistant to Sodium Hypo-Chloride
Built-in mixing chamber
Easy to use black manual bypass (ON/OFF) lever
In-line 100 micron filtration system
Automatic air relief valve
Flow range: 4.2 to 600 gallons per hour
Injection rate: 1% (1:100) to 10% (1:10)
Injector operating pressure: 10-85 psi
Heavy-duty siphon hose
Hose draws out of 6.6-gallon decontamination solution tank placed in storage area below
Part Number: 1006375
This document contains information proprietary to DHS Systems LLC and is intended solely for use by its customers. No portion of this document may be reproduced
for release to a third party without written consent of DHS Systems LLC.
G2 Series Decontamination Water Heater
0003-2
0003
DHS Systems LLC

Advertisement

Table of Contents
loading

This manual is also suitable for:

G2sG2s-i

Table of Contents