To Install Drivers - Sun Microsystems Sun Ultra 27 Operating System Installation Manual

Workstation linux, opensolaris and solaris
Hide thumbs Also See for Sun Ultra 27:
Table of Contents

Advertisement

The Tools and Drivers DVD also contains the tools to re-create and mount the diagnostic
Note –
partition. You should not have to do this unless you accidentally erased it. See the Sun Ultra 27
Workstation Service Manual for details.
Perform this procedure to install drivers if you are performing a new installation of the Solaris
OS.

To Install Drivers

Log in to the system as superuser.
1
Insert the Tools and Drivers DVD into the DVD drive.
2
The DVD is automounted by the Solaris OS.
Change to the /cdrom/cdrom0/drivers/sx86 directory by typing the following command:
3
# cd /cdrom/cdrom0/drivers/sx86
Run the installation script by typing the following command:
4
# ./install.sh
The system drivers are installed.
The script prompts you to reboot the system for changes to take effect.
Press the Y key to reboot, or the N key to allow a manual reboot.
5
Remove the DVD from the DVD drive.
6
When prompted for networking information on your system, enter the networking information
7
for your server.
Chapter 3 • Installing the Solaris Operating System
Installing Drivers
21

Advertisement

Table of Contents
loading

Table of Contents