System Administrator's ID
The factory default is 11111
1.
Press System Admin Settings.
2.
Press System Admin ID.
Press Keyboard.
3.
4.
Use the numeric keypad on the control panel or the keyboard displayed on the screen to enter the
system administrator ID using up to 32 characters.
5.
Press Save.
6.
Press Re-enter System Administrator ID.
7.
Press Keyboard.
8.
Re-enter the same system administrator ID by using the numeric keypad on the control panel or
the keyboard displayed on the screen using up to 32 characters.
9.
Press Save.
System Administrator's Password
We recommend that you set a password to enhance security.
The factory default is x-admin.
To tell the system administrator to enter the password whenever displaying the System Administrator
Menu, set Password Entry Control Panel to On in Authentication / Security Settings.
Xerox® Wide Format IJP 2000
User Guide
System Administrator Menu Settings
5-23