Table of Contents
Advertisement
8.
Make sure that the roll paper's winding direction is correct, and place the paper holder onto the
saddle.
9.
Rotate the roll paper, and insert the leading edge of roll paper under the roller.
The roll paper is automatically conveyed and stops.
Note
When the roll paper is not fed smoothly because its leading edge is damaged, cut the leading
edge using a cutter knife or a similar tool before loading the paper.
10. Press the paper cutter button to cut the leading edge of paper.
Note
If you press the paper cutter button once, 5.9 in. (150 mm) of the paper is cut. If you hold down
the paper cutter button, the paper comes out until you release the button, and it is cut at the
position where you release the button.
Xerox® Wide Format IJP 2000
User Guide
Before Using the Machine
1-15
Advertisement
Table of Contents
