Xerox Wide Format IJP 2000 User Manual page 64

Xerox® CentreWare® Internet Services
For example, if you have changed the port number to 8080, enter the address as shown below.
http://<the machine's IP address>:8080/
or
http://<the machine's Internet address>:8080
Note
If you have enabled encrypted communication, you need to enter the address beginning https
instead of http in the browser address field in order to access CentreWare Internet Services.
Settings on the machine
The following describes how to configure the settings at the machine user interface and how to set the
IP address for the machine when an IP address is not already assigned to the machine. The IP address
is used to access CentreWare Internet Services.
Note
CentreWare Internet Services can also be used to make these settings. For details, refer to the Help
section which can be displayed by clicking Help in the upper right of the CentreWare Internet
Services screen.
1. On the System Administrator Menu screen, press System Settings > Network Settings.
Note
For information on how to display the System Administrator Menu screen, refer to
Administrator Menu Settings Overview
Check that LPD is set to Enabled for Port Settings.
2.
For information on the LPD port setting, refer to
Press Close to return to the Network Settings screen.
3.
4. Press Protocol Settings > IPv4 - IP Address
5. Specify the IP address using the numeric keypad.
6. Press Save.
7. Press Close several times until the System Administrator Menu screen is displayed.
8. Press Close.
Note
When a message prompting you to reboot the machine appears, follow the message to reboot the
machine.
2-4
on page 5-2.
Port Settings
System
on page 5-17.
Xerox® Wide Format IJP 2000
User Guide