The rectangular boxes at the top of following graphic represent the positions of the print heads in
reference to the Print Adjustment Chart.
Notes
–
To avoid confusion when performing adjustments, do not move print head 3. Use print head 3
as the reference point and work outward from the center.
–
To eliminate gaps and overlaps between print heads 1, 2, or 3, perform corrections in the
following order: adjust print head 2 to print head 3, then adjust print head 1 to print head 2.
–
To eliminate gaps and overlaps between print heads 3, 4, or 5, perform corrections in the
following order: adjust print head 4 to print head 3, then adjust print head 5 to print head 4.
13. Press Input Adjustment Value to adjust the position of each print head in the X-direction
(right/left) and the Y-direction (up/down).
Note
Input Adjustment Value is only valid when Image Join Overlay is turned off.
Xerox® Wide Format IJP 2000
User Guide
Daily Management and Maintenance
3-25