Xerox Wide Format IJP 2000 User Manual page 119

The factory default is On for all items.
1. Press Audio Tones.
2. Set each item as necessary, and click Close.
Item
Panel Select
Panel Alert
Machine Ready
Job Complete
Ink Level Alert
Low Media Alert
Fault
Auto Clear Notice
Manual Feed Set
Waste Full Alert
Xerox® Wide Format IJP 2000
User Guide
Description
Set the volume of the beep that sounds when a button on the
control panel is correctly selected.
Set the volume of the beep that sounds when a button that
cannot be selected is selected, or an operation is performed
while an error occurs.
Set the volume of the beep that sounds when the machine is
ready to print, for example, the power is turned on.
Set the volume of the beep that sounds when a job is
completed normally.
You can select the target jobs for which the beep is to sound.
Set the volume of the beep that sounds when the toner
cartridge needs replacing.
Set the volume of the beep that sounds when a job is
suspended because there is no paper in a tray.
Set the volume of the beep that sounds when a job fails.
You can select the target jobs for which the beep is to sound.
Set the volume of the beep that sounds five seconds before
auto clear.
Set the volume of the beep that sounds when paper is
inserted into the bypass (manual) feed table.
Set the volume of the beep that sounds when the waste ink
cartridge needs replacing.
System Administrator Menu Settings
Possible Value
Off, On
Off, On
Off, On
Off, On
Off, On
Off, On
Off, On
Off, On
Off, On
Off, On
5-9