Table of Contents
Advertisement
Carrying out Calibration
A chart is printed out automatically for calibration.
After replacing a print head or moving the machine, be sure to carry out calibration.
1.
On the System Administrator Menu screen, press Print Head Maintenance > Join Adjustment >
Calibration.
Note
To continue with Replacing print head, proceed to step 2. For information on Replacing print
head, refer to
Replacing a Print Head
For information on how to display the System Administrator Menu screen, refer to
Administrator Menu Settings Overview
2.
Select a type of paper to be used for calibration.
Note
Select a roll unit that contains paper of size A0 or larger. If the correct type of paper is not
selected, Start cannot be initiated.
3.
Press Start.
4.
Press Yes.
Calibration starts.
Press Done to end calibration.
5.
Xerox® Wide Format IJP 2000
User Guide
on page 3-9.
on page 5-2.
Daily Management and Maintenance
System
3-21
Advertisement
Table of Contents
