Used Consumables; Replacing An Ink Cartridge - Xerox Wide Format IJP 2000 User Manual

CAUTION:
– Keep ink cartridges out of the reach of children for safety. If a child swallows or licks
accidentally or if ink gets into child's eye, consult a physician immediately.
– If ink adheres to your hand when you handle an ink cartridge, flush with water. If ink gets into
your eye, flush with water immediately.
– If an abnormality such as a pain in the eye is found, consult your physician immediately.

Used Consumables

Dispose of used ink cartridges, waste ink cartridges, and print heads in accordance with local
regulations.

Replacing an Ink Cartridge

CAUTION:
To prevent possible static discharge when connecting the network cable to the Ink Container, touch the
machine frame to discharge any static prior to connecting the network cable.
The remaining amount of ink can be viewed in the Supplies screen on the touch screen.
An ink cartridge can be replaced at any time.
Notes
– Do not shake an ink cartridge before using it.
– Make sure the ink cartridges are properly installed to all of the following five bays: K1, M, Y, C,
and K2.
– Ink cartridges are arranged in the order of black 1 (K1), magenta (M), yellow (Y), cyan (C),
and black 2 (K2) from the bypass (manual) feed table side to the back. The label of each ink
cartridge indicates the ink color.
– Install ink cartridges at all of five locations: three locations for cyan, magenta, and yellow,
and two locations for black.
– Install each ink cartridge at the correct location as specified on the label.
– Even if printing is specified in black and white, it consumes not only black inks but also color
inks. All the color inks are consumed so that the print heads are protected.
For more information on the Supplies screen, refer to
Xerox® Wide Format IJP 2000
User Guide
Daily Management and Maintenance
Checking Consumables (Supplies) on page 1-28.
3-3