TCP/IP - IP Mode
Allows you to select the TCP/IP Internet protocol type.
The factory default is IPv4 Mode.
IPv4 Mode
Select this to fix the Internet protocol to be used to IPv4.
IPv6 Mode
Select this to fix the Internet protocol to be used to IPv6.
Dual Stack
Select this to use both IPv4 and IPv6 as the Internet protocol.
IPv4 - IP Address
Enter the subnet mask in the format of xxx.xxx.xxx.xxx, where xxx is a value between 0 and 255.
The first "xxx" cannot be set to numeric value 127 or 224 to 255.
The factory default is 192.168.150.150.
IPv4 - Subnet Mask
Enter the subnet mask in the format of xxx.xxx.xxx.xxx, where xxx is a value between 0 and 255.
The factory default is 255.255.255.0.
IPv4 - Gateway Address
Enter the subnet mask in the format of xxx.xxx.xxx.xxx, where xxx is a value between 0 and 255.
The first "xxx" cannot be set to numeric value 127 or 224 to 255.
The factory default is 192.168.150.1.
IPv6 Address Manual Set
To enter an IP address and Gateway address manually, select Enabled.
The factory default is Disabled.
Xerox® Wide Format IJP 2000
User Guide
System Administrator Menu Settings
5-19