5.
Install a new waste ink cartridge.
6.
Close the front cover.
7.
Close the upper unit.
Notes
–
Be careful not to pinch your fingers.
–
If the waste ink cartridge is not installed correctly, the message does not disappear, and the
machine does not start running.
Replacing a Print Head
When the amount of ink sprayed from the nozzle of a print head exceeds the specified value, the print
head replacement message appears on the touch screen.
On the touch screen, check the Supplies screen to see which print head needs to be replaced. The
amount used of ink at each print head can also be viewed in the Supplies screen.
For more information on the Supplies screen, refer to
Xerox® Wide Format IJP 2000
User Guide
Daily Management and Maintenance
Checking Consumables (Supplies)
on page 1-28.
3-9