Before Using the Machine
Loading/Replacing Paper
Replacing/Cutting Roll Paper
Load roll paper in the Roll Unit.
Once the paper has been loaded, cut the leading edge of the paper.
CAUTION:
This product uses roll printing paper. Be careful not to drop it as it is heavy and may cause
injuries.
Notes
–
When loading roll paper, be careful not to pinch your fingers.
–
When removing the piece of tape holding the edge of the roll paper from unraveling, make
sure to completely remove the adhesive. If the adhesive gets inside the machine, print quality
may decrease.
–
When loading paper of different type, size, or weight, change the paper settings after you
finish loading the paper. For information on how to do this, refer to
Settings
on page 1-19.
1.
Have a new roll paper ready.
2.
Pull out the roll unit.
Note
When you want to just cut the leading edge of the roll paper without replacing with new roll
paper, go to step 9.
1-12
Configuring Paper
Xerox® Wide Format IJP 2000
User Guide