Time Zone - Xerox Wide Format IJP 2000 User Manual

Time Zone

Allows you to set the time difference from GMT.
Set the time zone in the range of -12 to +12 in 30 minutes increments.
The factory default is [0] hours and [0] minutes.
Auto Power Saver
Set the time that must elapse from the last operation until the machine enters the Energy Saver mode, in the range
of 5 to 240 minutes in 1 minute increments.
The factory default is [60] minutes.
You cannot disable the functionality of switching to the Energy Saver mode.

Note
Auto Clear
5
Allows you to set the duration of time before the machine is automatically reset if no operation is performed.
When you select [On], specify a value between 30 seconds and 3 minutes in 30 second increments.
To disable this function, select [Off].
The factory default is [1 min.].
Backlight Off
Allows you to automatically turn off the backlight on the touch screen if the specified time has elapsed with no oper-
ations performed.
Select [Off] or [Same as Auto Clear]. If [Same as Auto Clear] is selected, the touch screen goes dark when the time
specified in [Auto Clear] has elapsed.
The factory default is [Off].
5.3 Common Settings
110