Time Zone; Daylight Savings; Power Saver Timers; Set/Change The Power Saver Time Intervals - Xerox Versant 2100 Press System Administration Manual

Time Zone

Use this option to set the time difference from Greenwhich Mean Time (GMT).
1. Select Machine Clock/Timers.
2. From the Machine Clock/Timers screen, select Time Zone and then select Change
Settings.
3. Use the arrows to set the time difference from Greenwich Mean Time (GMT).
4. Select Save to save the settings and return to the previous window.
5. Select Close and, if needed, log off Administrator mode.

Daylight Savings

With this feature enabled, the press automatically adjusts the current time when daylight
savings time starts and ends.
From the Machine Clock/Timers screen, select one of the following:
• Adjust off: Select this feature if you do not want to use the Daylight Savings feature.
• Adjust by Month, Day & Time: Select this feature to specify the start of the daylight
savings feature, by month, day and time.
• Adjust by Month, Week, Day of Week & Time: Select this feature to specify the
start of the daylight savings feature, by month, week, day of the week and time.

Power Saver Timers

In Power Saving mode, there is a low-power mode and a sleep mode. When a set time
has elapsed (from the last operation on the press), the press goes to low-power mode,
then to sleep mode.
The Power Saver Timers feature allows you to specify the amount of time to elapse
before the press enters these modes.
Note
Set the Sleep Mode time for a longer time interval than the Low Power Mode time.

Set/Change the Power Saver Time Intervals

Note
The time intervals for both the Low Power and Sleep modes may be changed to reflect
a value of 1-240 minutes for each mode. Through System Settings, you can also change
or set other options such as deactivating the feature or saving power after printing
completes.
1. Log in as the administrator.
2. Press the Tools button on the press Control Panel.
Xerox ® Versant 2100 Press
System Administration Guide
Common Service Settings
6-7