Panasonic KX-TVS95 Installation Manual page 88

Voice processing system
Hide thumbs Also See for KX-TVS95:
Table of Contents

Advertisement

4.2 CONNECTING THE VPS WITH THE PANASONIC KX-TA624
Recommended Outside (CO) Line feature settings:
a)
If the VPS is answering all incoming calls:
b)
If the VPS is only answering calls not answered by the operator (Operator Backup):
Table 4-2 2 CO (Outside) Lines, 2 Ports
c)
If the VPS is only answering calls not answered by user extensions:
6.
Connect the jack(s) assigned in Step 3 to the VPS.
7.
Connect your personal computer to the VPS and start your communication software
(i.e., HyperTerminal, Procomm Plus, Smartcom...).
8.
Disconnect the power from the VPS and set the DIP Switch to position 5.
Only perform this step when initially setting up the system.
CAUTION
Setting the DIP Switch to position 5 will default the Voice Processing System,
resulting in a loss of all user programming, and voice messages (except User1 and
User2 prompts).
88
Installation Manual
Outside (CO) Line Mode—Use System Programs [414] (Day Mode), [415]
(Night Mode), [416] (Lunch Mode) to set this parameter. Program all lines DIL to
the first extension of the Voice Mail hunt group. The KX-TA624 will allow
incoming outside calls to hunt only if the outside (CO) lines are DIL to the first
port of the hunt group. Lines programmed as "Normal" do not hunt.
Flexible Ringing Assignment—For each outside (CO) line, use System
Programs [408] (Day mode), [409] (Night Mode) and [410] (Lunch Mode) to
enable ringing at the operator's extension (jack).
Delayed Ringing Assignment—To give the operator time to answer the call
before the VPS picks up, we recommend setting the delay to 3 or 4 rings for each
extension connected to the VPS. Use System Programs [411] (Day Mode),
[412] (Night Mode) and [413] (Lunch Mode).
Outside (CO) Line Mode—Set the mode for each outside (CO) line to
"Normal" . Use System Programs [414] (Day Mode), [415] (Night Mode) and
[416] (Lunch Mode) to set this parameter.
CO Lines
1
2
Flexible Ringing Assignment—For each outside (CO) line, use System
Programs [408] (Day Mode), [409] (Night Mode) and [410] (Lunch Mode) to
enable ringing on every extension (jack) that you want to have ring.
Delayed Ringing Assignment—To give users time to answer the call before the
VPS picks up, we recommend setting the delay to 3 or 4 rings for each extension
connected to the VPS. Use System Programs [411] (Day Mode), [412] (Night
Mode) and [413] (Lunch Mode).
Outside (CO) Line Mode—Set the mode for each outside (CO) line to
"Normal". Use System Programs [414] (Day Mode), [415] (Night Mode) and
[416] (Lunch Mode) to set this parameter.
Ports
1, 2
1, 2

Advertisement

Table of Contents
loading

Table of Contents