B6 SYSTEM ADMINISTRATION—SYSTEM PARAMETER SETTINGS
Note
The VPS changes to and from DST at 2:00 AM. According to current U.S. guidelines, in
most of the United States, DST begins at 2:00 AM on the first Sunday in April and ends
at 2:00 AM on the last Sunday in October.
B6.5
Prompt Setting
This setting is required when Multilingual Service is enabled.
To access the menu for Prompt Setting, follow the menu path as shown:
System Administration Top Menu-1-5-5
Table B-27
Parameter
System
Prompt
Selection
Number
User 1
Prompt
Selection
Number
User 2
Prompt
Selection
Number
308
Installation Manual
Value Range
(Default)
1-9
Assigns a selection number (1-9) to each prompt. Callers
(None)
use the numbers to select the desired language for their
message prompts. This setting is required when either
one or both of the following parameters are set to
"Selective".
Port Assignment—Incoming Call Service Prompt
Authorization of External Message Delivery—Prompt
Mode
Example:
For service in English, press (7).
For service in French, press (8).
For service in Chinese, press (9).
The Message Manager is responsible for recording this
Multilingual Selection Menu.
Note
The Prompt Selection Number should not match the
first digit of any mailbox number, because mailbox/
extension access is possible during and after the
Multilingual Selection Menu.
Description/Function