Table of Contents
Advertisement
Table A-1
FEATURE
Remote Call
allows a subscriber and the Message
Manager to program his extension from a
Forwarding Set
remote location to forward various types of
(DPT Integration
calls to a desired extension or an outside
only)
telephone.
There are 6 forwarding settings available:
FWD All—Forward all incoming calls to a
desired extension number.
FWD Busy—Forward all incoming calls to a
desired extension number when the line is
busy.
FWD No Answer—Forward all incoming
calls to a desired extension number when
there is no answer.
FWD Busy or No Answer—Forward all
incoming calls to a desired extension number
when the line is busy or there is no answer.
FWD to CO*—Forward all incoming calls to
the Telephone number 1 or 2 (programmed in
the Mailbox Setting), or to any other number.
FWD Cancel—Cancel the forwarding setting.
* Must be enabled in the COS (Class of
Service) settings to be utilized.
With respect to PBX programming, it is
possible that "Call Forward to CO" is
disabled. To enable VPS Remote Call
Forwarding, the KX-TD1232, for example,
must be programmed properly. For the
COS of the extensions whose calls are to
be forwarded to a CO line, enable the
following: [504] Call Forward to Outside
Line.
Note
Rotary
provides guidance to callers using rotary
telephone systems or when several seconds
Telephone
pass without anything being entered by the
Service
caller.
DESCRIPTION
The extension assigned for Operator 1 in
the Day Mode is the Message Manager's
extension. However, its default extension
number (0) cannot be used with this
feature. When using this feature, you
must assign the extension number that is
included in the Extension Numbering
Plan.
A1 SYSTEM FEATURES
REFERENCES
•
See 5.5.2 Entering a Mailbox.
•
See "Remote Call Forward to
CO" in B2 SYSTEM
ADMINISTRATION—
MAILBOXES.
•
See "Remote Call FWD to CO"
in Table B-6 and Table B-7 in
B3 SYSTEM
ADMINISTRATION—
SETTING COS (CLASS OF
SERVICE) PARAMETERS.
•
See C3 SETTING COS
(CLASS OF SERVICE)
PARAMETERS.
•
See D7 REMOTE CALL
FORWARDING SET.
•
See "Remote Call Forwarding
Set" in the Glossary.
•
See 4.16 Remote Call
Forwarding Set in the
Subscriber's Guide.
•
See "Other Parameters-Rotary
Telephone Service" in B6.8
Other Parameters.
•
See "Rotary Telephone" in the
Glossary.
Installation Manual
245
Advertisement
Table of Contents
Troubleshooting
