Table of Contents
Advertisement
4.3 KX-TD500 PROGRAMMING FOR DIGITAL INTEGRATION
4.3
KX-TD500 PROGRAMMING FOR DIGITAL
INTEGRATION
Follow the procedure below to program the VPS card for DPT Integration.
1.
Assignment of the VPS card to be connected to the VPS
Note
If the VPS card to which the VPS will be assigned is already installed in the KX-TD500,
skip the steps a through d. If a new VPS card is installed in the KX-TD500, follow the steps
below.
a)
Go to the "1-1 Slot Assignment" screen.
b)
Assign the slot "Card Type" to be installed to "DLC" or "DHLC" card.
c)
Click "Apply" to save the card type assignment.
d)
Set "Status" to "INS".
92
Installation Manual
Screen output:
Advertisement
Table of Contents
Troubleshooting
