Kx-Tda/Kx-Taw Series Programming For Digital Integration - Panasonic KX-TVS95 Installation Manual

4.4 KX-TDA/KX-TAW SERIES PROGRAMMING
FOR DIGITAL INTEGRATION
A group of DPT ports connected to a VPS with DPT Integration is called "VM (DPT) Group"
for the KX-TDA/KX-TAW series. Each VM (DPT) Group consists of a maximum of 12 ports (24
channels) of the VPS.
Only one VM (DPT) Group can be assigned for the KX-TDA50 and KX-TAW. On the other
hand, up to two VM (DPT) Groups can be assigned for the KX-TDA100/TDA200; that is, two
VPSs can be connected to one PBX.
It is necessary to assign the VM (DPT) Group and VM (DPT) extension ports to use DPT
Integration.
1.
Assignment of VM (DPT) Group
a)
Go to the "3.Groups-7.VM(DPT) Group-2.Unit Setting" screen.
b)
Assign a floating Extension Number for VM Unit number.
c)
Click "Apply" to save the changed data.
Note
You can use a maximum two VM (DPT) groups (Unit No.1 and Unit No.2).
All extension ports for one VM (DPT) group should be connected to only one DHLC
card or only one DLC card.
Note
The above screen output is an example of the KX-TDA200.

4.4 KX-TDA/KX-TAW SERIES PROGRAMMING FOR DIGITAL INTEGRATION

Screen output:
Installation Manual 101