Table of Contents
Advertisement
Table 7-3 Error Indications at System Startup
ROM ERROR: Sum Error!!
FLASH MEMORY ERROR: Initialize
Error!!
FLASH MEMORY ERROR: No System!! No system Flash Memory present.
FLASH MEMORY ERROR: Program
Load Error!!
FLASH MEMORY ERROR: Program
Sum Error!!
FLASH MEMORY ERROR: System
Data Error!!
SYSTEM ERROR: 1
SYSTEM ERROR: 2
SYSTEM ERROR: 3
SYSTEM ERROR: 4
SYSTEM ERROR: 5
SYSTEM ERROR: 6
SYSTEM ERROR: 7
SYSTEM ERROR: 8
SYSTEM ERROR: 9
SYSTEM ERROR: 10
SYSTEM ERROR: 11
SYSTEM ERROR: 12
SYSTEM ERROR: 13
SYSTEM ERROR: 14
No CO lines are active!!
COs are all disabled!!
APT(DPT) Interface Connection is not
Established.
Indication
Meaning
ROM checksum error.
Flash Memory initialization error.
Program could not be loaded from system Flash
Memory.
Checksum error in program loaded from system
Flash Memory.
Error Loading of administrator data from system
Flash Memory.
Administrator data error.
Error loading of report data.
Clock error.
Mailbox data error.
Message data error (1).
Message data error (2).
Error loading of control data.
Error loading of voice prompt data.
Error loading of MWL control data.
Error loading of flash memory identify data.
Error writing of VBI chain data.
Error writing of BLK chain data.
Error loading of user prompt modify data.
Error loading of Class of Service data.
No Port cards present.
All Ports are malfunctioning.
Ports are malfunctioning for APT(DPT) Integration
because telephone lines are disconnected or
Integration with PBX is not set to APT(DPT)
integration mode.
7.2 UTILITY COMMANDS
Installation Manual
193
Advertisement
Table of Contents
Troubleshooting
