Table of Contents
Advertisement
B6 SYSTEM ADMINISTRATION—SYSTEM PARAMETER SETTINGS
Table B-31
Parameter
Outgoing Call
Setup
Sequence
Other Parameters-Message Waiting Notification
Controls the handling of message waiting notification calls.
To access the menu for Message Waiting Notification Parameter, follow the menu
path as shown:
System Administration Top Menu-1-5-8-3
Table B-32
Parameter
Outgoing
Call Ports
Message
Waiting
Lamp Ports
316
Installation Manual
Value Range
(Default)
Up to 12 digits
Specifies the sequence of codes used by the VPS when
consisting of
calling a CO line. You can set up to 12 digits. The default
value is "T". "T" indicates that the system will dial the
0-9,
, #, F, R,
telephone number only after detecting a dial tone.
S, T, W
(T)
Example:
9W = (9) - 1-s wait - dial telephone number. "9" is the CO
line access number.
F: Hook Flash
R: Ringback Tone Detection
S: Silence Detection
T: Dial Tone Detection
W: Wait for 1 s
1-9, 0, , #: Dial Codes
Value Range
(Default)
Port No.
Specifies the port numbers used for the Message Waiting
(1-2)
Notification Device feature. The VPS makes outgoing
calls using the port specified in this parameter. At least 1
port must be specified.
Port No.
Specifies the port numbers used for the Message Waiting
(1-2)
Notification Lamp feature.
The VPS turns on the Message Waiting Lamp of the
extension using the port specified in this parameter. At
least 1 port must be specified.
Description/Function
Description/Function
Advertisement
Table of Contents
Troubleshooting
